E.MIX marble fix
Packaging
- 40 kg
E.MIX marble fix is a high quality premixed dry-set mortar specially designed for fixing marble onto floor between 5 - 15 mm thick. It is cement-based, water resistant and can be used in interior dry or wet conditions. E.MIX marble fix is also suitable for installing granite tiles.
E.MIX marble fix is specially designed for fixing marble onto floor between 5 - 15 mm thick. It is also suitable for installing granite tiles. Suitable substrates are concrete, prepacked screed or cement/ sand screed.
- Tiling should not be done under extremely hot, windy and rainy conditions to avoid adverse effects on adhesion. Do not soak tiles prior to tiling. No further addition of water is allowed to the unused mortar that has exceeded its pot life or has begun to set.
- To enhance product performance in harsher, external conditions or to meet higher requirement, E.MIX render admix or E.MIX bond admix is recommended to be added to E.MIX marble fix in replacement of water.
-
For best results in tiling, apply the mortar by pressing it firmly against the substrate with a trowel and back buttering the backside of tiles. Notched trowel with higher ridges can also be used for applying E.MIX marble fix. Press tiles onto the sub-base firmly and knock into position.
-
Specially designed for fixing marble onto floor between 5 - 15 mm thick. It is also suitable for installing granite tiles.
