E.MIX ep 501 gp
Part A – 3.75 kg pail
Part B – 1.25 kg pail
Packaging
- 5 kg
E.MIX ep 501 gp (grip primer) is a solvent-free, low viscosity, two component, epoxy resin-based primer, designed for use as a primer.
Designed to prime and seal concrete, ceramic, glass substrates before the application of E.MIX flooring systems. Where substrates are very porous, more than one coat of E.MIX ep 501 gp may be required to saturate the surface and achieve the desired bonding efficiency.
-
Good ventilation is required.
-
E.MIX ep 501 gp can be applied using paint brush or rollers.
-
If the subsequent step is delayed, it is strongly recommended to broadcast with fine aggregates to promote the adhesion of the subsequent coating.
-
If the surface must be abraded, vacuum clean and degreased with solvent degreased then reapplied with another coat of primer.
-
If the subsequent step is going to be epoxy screed, the primer must be tacky to ensure proper adhesion. If the primer is left longer than the maximum overcoating time, it must be abraded off and reapplied.
.
-
- Excellent bond strength on ceramic and glass
- Excellent penetration and wetting properties
- Solvent-free system
- Cure underwater
- Low viscosity
- Easy to apply
- Seals pore and capillaries
- Excellent adhesion to damp concrete
