E.MIX es 110
Packaging
- 24 kg
E.MIX es 110 is a ready-to-use, high performance, liquid applied waterproofing membrane. It is specially formulated with styrene-butadiene co-polymer to provide seamless, durable and elastomeric waterproofing onto concrete substrates to prevent ingression of water and moisture prior to application of tiles or other finishes topping.
E.MIX es 110 is an approved product in HDB Material Listing.
For residential, commercial and industrial applications. It is suitable for waterproofing of kitchens, toilets, balconies, lift pit and internal wet areas. Also used in podium decks, walkways, terraces and planter boxes.
-
E.MIX es 110 may be protected by laying a screeding material after the 2nd coat has dried to prevent damage to the waterproof membrane. Tiles and other surface topping can only be applied after E.MIX es 110 is completely cured.
- Water leakage test may commence after 24 hours from the application of the second coat of E.MIX es 100 from which the water waterproofing coating would have dried after curing in ambient conditions.
-
Elastomeric & Flexible
-
Rapid drying
-
Tough & durable
-
Water-based & non-toxic
-
Seamless
-
Resistant to fungi & algae growth
- Do not use in areas subjected to rising dampness, with negative hydrostatic pressure and not dry or when inclement weather is imminent. E.MIX es 110 is not supposed to be left exposed and is not suitable for regular foot traffic. Do not apply solvent over cured E.MIX es 110 membrane. Do not apply when the substrate temperature is below 10°C or above 38°C.